D-Link dws-1008 manual Totl, Link DWS-1008 CLI Manual 399

	TxUniPkt		TxUniByte	RxPkt		UndcrptPkt
		TxMultiPkt		TxMultiByte		RxByte	UndcrptByte
									PhyErr
1.0:	1017	0	10170	0	14	8347	0	0	3964
2.0:	5643	55683	822545	8697520	3	1670	0	0	8695
5.5:	0	0	0	0	5	258	0	0	4
6.0:	0	0	0	0	0	0	0	0	51
9.0:	0	0	0	0	1	172	0	0	53
11.0:	0	0	0	0	17	998	0	0	35
12.0:	0	0	0	0	0	0	0	0	26
18.0:	0	0	0	0	0	0	0	0	38
24.0:	0	0	0	0	0	0	0	0	47
36.0:	0	0	0	0	0	0	0	0	1
48.0:	0	0	0	0	1	68	0	0	29
54.0:	0	0	0	0	0	0	0	0	5
TOTL:	6660	55683	832715	8697520	41	11513	0	0	12948
...

The following table describes the fields in this display:

Field			Description
DAP	Distributed AP number.
Port	DWS-1008 port number (if the AP is directly connected to the DWS-1008 and
	the DWS-1008 port is configured as an AP access port).
radio	Radio number.
LastPktXferRate	Data	transmit rate,	in Mbps,	of the	last	packet	received	by	the
	DWL-8220AP access point.
NumCntInPwrSave	Number of clients currently in power save mode.
LastPktRxSigStrength	Signal	strength, in	dBm, of	the	last	packet	received	by	the
	DWL-8220AP access point.
	Signal-to-noise ratio (SNR), in decibels (dB), of the last packet received by the
	DWL-8220AP access point.
LastPktSigNoiseRatio	This value indicates the strength of the radio signal above the noise floor. For
	example, if the noise floor is -88 and the signal strength is -68, the SNR is 20.
	If the value is below 10, this indicates a weak signal and might indicate a problem
	in the RF environment.
TKIP Pkt Transfer Ct	Total number of TKIP packets sent and received by the radio.

D-Link DWS-1008 CLI Manual 399