Usage: To enable or disable one or more radios to which a profile is assigned, use the set ap radio radio-profile command. To enable or disable all radios that use a specific radio profile, use the set radio-profile command.

Examples: The following command enables radio 1 on the DWL-8220AP access points connected to ports 1 through 5:

DWS-1008# set ap 1-5 radio 1 mode enable success: change accepted.

The following command enables radio 2 on ports 1 through 3:

DWS-1008# set ap 1-3 radio 2 mode enable success: change accepted.

set {ap dap} radio radio-profile

Assigns a radio profile to an DWL-8220AP radio and enables or disables the radio.

Syntax: set {ap port-list dap {dap-num auto}} radio {1 2} radio-profile name mode {enable disable}

ap port-list

List of ports.

dap dap-num

Number of a Distributed AP.

dap auto

Sets the radio profile for the DWL-8220AP configuration template.

radio 1

Radio 1 of the DWL-8220AP.

radio 2

Radio 2 of the DWL-8220AP.

radio-profile name

Radio profile name of up to 16 alphanumeric characters, with no

 

spaces.

mode enable

Enables radios on the specified ports with the parameter settings in the

 

specified radio profile.

mode disable

Disables radios on the specified ports.

D-Link DWS-1008 CLI Manual

330

Page 333
Image 333
D-Link dws-1008 manual Set ap dap radio radio-profile, Radio-profile name, Mode enable, Mode disable