Stores the certificate authority’s administrative certificate, which authenticates the switch to Web View.

Examples The following command adds the certificate authority’s certificate to switch certificate and key storage:

DWS-1008# crypto ca-certificate admin Enter PEM-encoded certificate

-----BEGIN CERTIFICATE-----

MIIDwDCCA2qgAwIBAgIQL2jvuu4PO5FAQCyewU3ojANBgkqhkiG9wOBAQUFADCB

mzerMClaweVQQTTooewi\wpoer0QWNFNkj90044mbdrl1277SWQ8G7Diw YUtrqoQplKJvxz .....

Lm8wmVYxP56M;CUAm908C2foYgOY40=

-----END CERTIFICATE-----

See Also:

• show crypto ca-certificate

crypto certificate

Installs one of the switch’s PKCS#7 certificates into the certificate and key storage area on the switch. The certificate, which is issued and signed by a certificate authority, authenticates the switch either to Web View, or to 802.1X supplicants (clients).

Syntax: crypto certificate {admin eap web} PEM-formatted-certificateadmin

eap

Stores the certificate authority’s Extensible Authentication Protocol

 

(EAP) certificate, which authenticates the switch to 802.1X

 

supplicants (clients).

web

Stores the certificate authority’s WebAAA certificate, which

 

authenticates the to clients who use WebAAA.

PEM-formatted-certificateASCII text representation of the certificate authority PKCS#7 certificate, consisting of up to 5120 characters that you have obtained from the certificate authority.

Defaults: None.

Access: Enabled.

Usage: To use this command, you must already have generated a certificate request with the crypto generate request command, sent the request to the certificate authority, and obtained a signed copy of the switch certificate as a PKCS#7 object file. Then do the following:

D-Link DWS-1008 CLI Manual

216

Page 219
Image 219
D-Link dws-1008 manual Crypto certificate, Begin Certificate