D-Link dws-1008 manual Set radius server, Address, Auth-port, Show aaa output, Author-password

set radius server

Configures RADIUS servers and their parameters. By default, the switch automatically sets all these values except the password (key).

Syntax: set radius server server-name[address ip-address] [auth-port port-number] [acct-port port-number] [timeout seconds] [retransmit number] [deadtime minutes] [[key string] [encrypted-key string]] [author-password password]

	server-name	Unique name for this RADIUS server. Enter an alphanumeric string
		of up to 32 characters, with no blanks.
	address	IP address of the RADIUS server. Enter the address in dotted decimal
	ip-address	notation.
	auth-port	UDP port that the switch uses for authentication and authorization.
	port-number
	acct-port	UDP port that the switch uses for accounting.
	port-number
	timeout seconds	Number of seconds the switch waits for the RADIUS server to
		respond before retransmitting. You can specify from 1 to 65,535
		seconds.
	retransmit number	Number of transmission attempts made before declaring an
		unresponsive RADIUS server unavailable. You can specify from
		1 to 100 retries.
	deadtime minutes	Number of minutes the switch waits after declaring an unresponsive
		RADIUS server unavailable before retrying that RADIUS server.
		Specify between 0 (zero) and 1440 minutes (24 hours). A zero value
		causes the switch to identify unresponsive servers as available.
	key string	Password (shared secret key) the switch uses to authenticate to
	encrypted-key string	RADIUS servers.You must provide the same password that is defined
		on the RADIUS server. The password can be 1 to 64 characters long,
		with no spaces or tabs.
		• Use the key option to enter the string in its unencrypted form.
		MSS encrypts the displayed form of the string in show config and
		show aaa output.
		• To enter the string in its encrypted form instead, use the
		encrypted-keyoption. MSS does not encrypt the string you enter,
		and instead displays the string exactly as you enter it.
	author-password	Number of minutes the switch waits after declaring an unresponsive
	password	RADIUS server unavailable before retrying that RADIUS server.
		Specify between 0 (zero) and 1440 minutes (24 hours). A zero value
		causes the switch to identify unresponsive servers as available.
D-Link DWS-1008 CLI Manual		236