D-Link dws-1008 manual Set radio-profile qos-mode, Set radio-profile rfid-mode, Svp, Wmm

set radio-profile qos-mode

Sets the prioritization mode for forwarding queues on AP radios managed by the radio profile.

Syntax: set radio-profile name qos-mode {svp wmm}

name	Radio profile name.
svp	Optimizes forwarding prioritization of AP radios for SpectraLink Voice Priority
	(SVP).
wmm	Classifies and marks traffic based on 802.1p and DSCP, and optimizes forwarding
	prioritization of AP radios for Wi-Fi Multimedia (WMM).

Defaults: The default QoS mode is wmm.

Access: Enabled.

Usage: When SVP is enabled, AP forwarding prioritization is optimized for SpectraLink Voice Priority (SVP) instead of WMM, and the AP does not tag packets it sends to the DWS-1008. Otherwise, classification and tagging remain in effect.

If you plan to use SVP or another non-WMM type of prioritization, you must configure ACLs to tag the packets.

Examples: The following command changes the QoS mode for radio profile rp1 to SVP:

DWS-1008# set radio-profile rp1 qos-mode svp success: change accepted.

See Also:

•set radio-profile mode 6

•show radio-profile

set radio-profile rfid-mode

Enables AP radios managed by a radio profile to function as location receivers in an AeroScout Visibility System. An AeroScout Visibility System allows system administrators to track mobile assets using RFID tags.

When you enable RFID mode on a radio profile, radios in the profile can receive and process signals transmitted by RFID tags and relay them with related information to the AeroScout Engine.

D-Link DWS-1008 CLI Manual 350