D-Link dws-1008 manual Set service-profile psk-raw, Syntax set service-profile name psk-raw hex

Examples: The following command configures service profile sp3 to use passphrase “1234567890123<>?=+&% The quick brown fox jumps over the lazy sl”:

DWS-1008#set service-profile sp3 psk-phrase “1234567890123<>?=+&% The quick brown fox jumps over the lazy sl”

success: change accepted.

See Also:

•set mac-user attr

•set service-profile auth-psk

•set service-profile psk-raw

•set service-profile wpa-ie

•show service-profile

set service-profile psk-raw

Configures a raw hexadecimal preshared key (PSK) to use for authenticating WPA clients, in a service profile. Radios use the PSK as a pairwise master key (PMK) to derive unique pairwise session keys for individual WPA clients.

Syntax: set service-profile name psk-raw hex

name	Service profile name.
hex	A 64-bit ASCII string representing a 32-digit hexadecimal number. Enter the
	two-character ASCII form of each hexadecimal number.

Defaults None.

Access: Enabled.

Usage: MSS converts the hexadecimal number into a 256-bit binary number for system use. MSS also stores the hexadecimal key in the DWS-1008’s configuration. The binary number is never displayed in the configuration.

To use PSK authentication, you must enable it and you also must enable the WPA IE.

Examples: The following command configures service profile sp3 to use a raw PSK with PSK clients:

DWS-1008# set service-profile sp3 psk-raw c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d success: change accepted.

D-Link DWS-1008 CLI Manual 374