D-Link dws-1008 manual Show dap global, Syntax show dap global dap-num serial-id serial-ID

The following command displays information for all Distributed APs configured on this DWS-1008 that have active connections:

DWS-1008#show dap connection

Total number of entries: 1

DAP	Serial Id	DAP IP Address	DWS-1008 IP Address
7	223344	10.10.4.88	10.9.9.11

The following table describes the fields in the display:

Field	Description
	Connection ID you assigned to the Distributed AP.
DAP	If the connection is configured on another DWS-1008, this field contains a
	hyphen ( - ).
Serial Id	Serial ID of the Distributed AP.
DAP IP Address	IP address assigned by DHCP to the Distributed AP.
	System IP address of the DWS-1008 on which the AP has an active connection.
DWS-1008 IP Address	This is the switch that the AP used for booting and configuration and is using for
	data transfer.

show dap global

Displays connection information for Distributed APs configured on an DWS-1008.

Syntax: show dap global [dap-num serial-id serial-ID]

dap-numNumber of a Distributed AP for which to display configuration settings.

serial-idDWL-8220AP access point serial ID.

Defaults: None.

Access: Enabled.

Usage: Connections are shown only for the Distributed APs that are configured on the DWS-1008 from which you enter the command.

D-Link DWS-1008 CLI Manual 418