Examples: The following command tests the RF link between the switch and the client with MAC address 00:0e:9b:bf:ad:13:

DWS-1008#test rflink mac 00:0e:9b:bf:ad:13

 

 

RF-Link Test to 00:0e:9b:bf:ad:13 :

 

 

 

Session-Id: 2

 

 

 

 

Packets Sent

Packets Rcvd

RSSI

SNR

RTT (micro-secs)

------------

------------

-------

-----

----------------

20

20

-68

26

976

The table below describes the fields in this display.

Field

Description

Packets Sent

The number of test packets sent from the switch to the client.

 

 

Packets Rcvd

The number of test packets acknowledged by the client.

 

 

RSSI

Received signal strength indication (RSSI)—the strength of the RF signal from the

client, in decibels referred to 1 milliwatt (dBm).

 

 

 

SNR

Signal-to-noise ratio (SNR), in decibels (dB), of the data received from the client.

 

 

RTT (micro-secs)

The round-trip time, in microseconds, for the client response to the test packets.

 

 

See Also:

show show rfdetect data

show rfdetect visible

D-Link DWS-1008 CLI Manual

285

Page 288
Image 288
D-Link dws-1008 manual DWS-1008# test rflink mac 000e9bbfad13, Rssi SNR, RTT micro-secs, 976