D-Link dws-1008 manual Clear service-profile

See Also:

•set {ap dap} radio radio-profile

•set radio-profile mode

•show {ap dap} config

•show radio-profile

clear service-profile

Removes a service profile or resets one of the profile’s parameters to its default value.

Syntax: clear service-profile name

[soda {agent-directory failure-page remediation-acl success-page logout-page}]

name Service profile name.

soda agent-directory	Resets the directory for Sygate On-Demand (SODA) agent files
	to the default directory. By default, the directory name for SODA
	agent files is the same as the service profile name.
soda failure-page	Resets the page that is loaded when a client fails the checks
	performed by the SODA agent. By default, the page is generated
	dynamically.
soda remediation-acl	Disables use of the specified remediation ACL for the service profile.
	When no remediation ACL is specified, a client is disconnected
	form the network when it fails SODA agent checks.
soda success-page	Resets the page that is loaded when a client passes the checks
	performed by the SODA agent. By default, the page is generated
	dynamically.
soda logout-page	Resets the page that is loaded when a client logs out of the network.
	By default, the client is disconnected from the network without a
	page being loaded.

Defaults: None

Access: Enabled

Usage: If the service profile is mapped to a radio profile, you must remove it from the radio profile first. (After disabling all radios that use the radio profile, use the clear radio-profilename service-profilename command.)

D-Link DWS-1008 CLI Manual 310