++Connecting the Soundbar to Your Network via the WPS


Plug In


WPS button

SETUP button



Wireless Router

-- Follow the 1 to 3 steps as shown on the previous page. (See page 33)

4.Select WPS from the network type, and then press Next.

5.Press the WPS button on your wireless router, and then press the WPS/Wi-Fi SETUP button on the back of the Soundbar for 1 second. Once the Soundbar is connected, WPS appears on the display screen and the Soundbar produces a sound at the same time.

You can also activate WPS function by pressing and holding Surr.Sound button on the remote for over 5 seconds.

The Soundbar does not support Wi-Fi Direct or Wi-Fi Setup (tethering).

Some Wi-Fi devices may search for and find the Soundbar, but not support the connection.

For activation of the WPS function on a relevant AP, refer to the AP’s manual.

The WPS function may not be supported on some APs. In that case connect to the Internet using a wired network or the Soundbar’s Wi-Fi Setup.

The Soundbar goes into stand-by for 2 minutes when you press the WPS/Wi-Fi SETUP button. While the Soundbar is in stand-by, press the WPS button of your router.

For the WPS stand-by duration and the specifications of your router, refer to the router’s manual.

After pairing is complete, the Soundbar naming screen appears. Edit the name or enter a name of your own choosing.