D-Link dws-1008 manual Set service-profile cac-session, CAC is not used, Session

name	Service profile name.
none	CAC is not used.
session	CAC is based on the number of active sessions.

Defaults: The default CAC mode is none.

Access: Enabled.

Examples: The following command enables session-based CAC on service profile sp1:

DWS-1008# set service-profile sp1 cac-mode session success: change accepted.

See Also:

•set service-profile cac-session

•show service-profile

set service-profile cac-session

Specifies the maximum number of active sessions a radio can have when session-based CAC is enabled. When an DWL-8220AP has reached the maximum allowed number of active sessions, the radio refuses connections from additional clients.

Syntax: set service-profile name cac-session max-sessions

name	Service profile name.
max-sessions	Maximum number of active sessions allowed on the radio.

Defaults: The default number of sessions allowed is 14.

Access: Enabled.

Usage: This command applies only when the CAC mode is session. If the CAC mode is none, you can still change the maximum number of sessions, but the setting does not take effect until you change the CAC mode to session. To change the CAC mode, use the set service-profilecac-modecommand.

D-Link DWS-1008 CLI Manual 363