The clear ap radio command resets the radio to the default settings.
Number of a Distributed AP on which to reset a radio. Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP. All radios on the DWL-8220AP.
List of ports connected to the DWL-8220AP access point(s) on which to reset a radio.

Access Point Commands

Use DWL-8220AP access point commands to configure and manage DWL-8220AP access points. Be sure to do the following before using the commands:

Define the country-specific IEEE 802.11 regulations on the DWS-1008 switch.

Install the DWL-8220AP access point and connect it to a port on the switch.

Configure an DWL-8220AP access port (for a directly connected AP) or a Distributed AP).

Caution: Changing the system country code after DWL-8220AP configuration disables DWL-8220AP access points and deletes their configuration. If you change the country code on a switch, you must reconfigure all DWL-8220AP access points.

clear {ap dap} radio

Disables an DWL-8220AP radio and resets it to its factory default settings.

Syntax: clear {ap port-list dap dap-num} radio {1 2 all} ap port-list

dap dap-numradio 1 radio 2 radio all

Defaults:

Usage: When you clear a radio, MSS performs the following actions:

Clears the transmit power, channel, and external antenna setting from the radio.

Removes the radio from its radio profile and places the radio in the default radio profile.

This command does not affect the PoE (Power over Ethernet) setting.

D-Link DWS-1008 CLI Manual

307

Page 310
Image 310
D-Link dws-1008 manual Access Point Commands, Clear ap dap radio