Printronix P7000 user manual Character Set, Sfcc d Command, PSeries Dbl High, FF Valid at TOF

Chapter 4 LinePrinter Plus Emulation (with PCL-II)

Character Set

Specifies a character set as shown in the “P-Series Character Set Menu” on page 225. To use one of these sets, choose the desired group heading (such as European Sets) and press ENTER. Then choose the desired set within that group (such as Roman 8) and press ENTER. Both the group and the desired set will be starred to indicate your selection. Character sets are shown in detail in the Character Sets Reference Manual.

SFCC d Command

•Even dot plot (default). This option interprets SFCC d Command as even dot plot.

•Double High. This option interprets SFCC d Command as double high. Select this option for backward compatibility.

PSeries Dbl High

Allows printing compatibility between current and older model printers.

•Normal (default). This is normal, double-high printing for current model printers.

•P3/4/6/9 Compat. Where older printers print two dot rows higher, this option allows for compatibility by raising the print two dot rows to match the current models dot row value (two dot rows lower).

FF Valid at TOF

•Enable (default). Performs a form feed when the host sends a Form Feed command and the printer is at the top of form.

•Disable. Will not perform a form feed when the host sends a Form Feed command and the printer is at the top of form.

224