
Optimizing Print Speed
Optimizing Print Speed
LP+, IGP/PGL, and IGP/VGL Emulations
The printer has been configured at the factory for optimal print speed. To optimize print quality instead, you can change values for specific configuration parameters such as Barcode Quality and Print Quality. Doing so, however, will decrease the printer speed.
If you have optimized the printer for print quality, you can change it to optimal speed by selecting the values as follows:
•Bar Code Quality (Printer Control menu): Select “Draft.” (See page 70 for the Configuration Main Menu, and see page 279 for a written description of Bar Code Quality.)
•Print Quality (IGP/PGL emulation): Select “Dataprocessing.” (See page 129 for the IGP/PGL Configuration Menu, and see page 143 for a written description of Print Quality.)
•Print Quality (IGP/VGL emulation): Select “Dataprocessing.” (See page 148 for the IGP/VGL Configuration Menu, and see page 157 for a written description of Print Quality.)
Coax/Twinax Emulation
You can increase print speed by selecting the Enable mode for the Early Print Complete configuration parameter in the Coax/Twinax Emulation. However, if an error occurs while in Enable mode, you may lose data. For more information, refer to “Early Print Complete” on page 172. (For the Coax/Twinax Emulation menu, refer to page 167.)
69