Printronix P7000 user manual Ascii Data Port, Ipds Data Port, Keep Alive Timer, Ethernet Speed

Chapter 4 NETWORK SETUP MENU

ASCII Data Port

This option sets the port number for ASCII print jobs. The data port number needs to match your host system setting.

•9100 (default)

•1023 - 65535

IPDS Data Port

This option allows you to set the port number for IPDS print jobs only if the IPDS option is installed.

The range is 0 - 5000, and the factory default is 5001.

Keep Alive Timer

This is the time that the Keep Alive Timer will run. With the Keep Alive Timer on, the tcp connection will stay connected even after the print job has terminated.

•3 Minutes (default)

•2 - 10 Minutes

Ethernet Speed

This menu option only appears if a 10/100Base-T network interface card (NIC) is installed. The Ethernet Speed menu allows compatibility with different systems and networks. The factory default is Auto Select.

•Auto Select. (default) This setting tells the 10/100Base-T NIC to perform an auto detection scheme and configure itself to be 10 Half Duplex, 10 Full Duplex, 100 Half Duplex, or 100 Full Duplex.

•10 Half Duplex. Tells the 10/100Base-T NIC to communicate at 10 Megabits per second using half duplex.

•10 Full Duplex. Tells the 10/100Base-T NIC to communicate at 10 Megabits per second using full duplex.

112