Printronix P7000 user manual Job Control, Ethernet Address

ETHERNET ADDRESS

•100 Half Duplex. Tells the 10/100Base-T NIC to communicate at 100 Megabits per second using half duplex.

•100 Full Duplex. Tells the 10/100Base-T NIC to communicate at 100 Megabits per second using full duplex.

Job Control

The job control mode has three options:

•Standard (default). The NIC waits for the printer to finish receiving the current job before sending another job. The status line shows “done” when the job is completely received by the NIC. This is the default.

•Enhanced. The NIC waits for the printer to finish receiving the current job before sending another job. The status line shows “done” when the job is fully printed.

•Off. No job synchonization between the NIC and the printer.

ETHERNET ADDRESS

ETHERNET

ADDRESS

(from page 108)

IP Address	Subnet
	Mask

Gateway Address

MAC

Address

*= Factory Default

DHCP

xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx

xxx.xxx.xxx.xxx hhhhhhhhhhhh Disable* Enable

IP Address

A numeric address such as 123.45.61.23 which identifies a printer or server in a LAN or WAN.

113