ANSI Emulation

Slashed Zero

This parameter allows you to print the numeral “0” with or without the slash. This option applies to all character sets except OCR-A and OCR-B.

Disable. Zero is printed without a slash.

Enable. Zero is printed with a slash.

Page Format

Margins

Left Margin. Defines where the first print column is located. The left margin is specified as the number of characters from the left edge of the form.

Right Margin. Defines where the last print column is located. The right margin is specified as the number of characters from the right edge of the form.

Top Margin. Defines the location of the first print line on the page. The top margin is specified as the number of lines from the top of the form's position.

Bottom Margin. Defines the location of the last print line on the page. The bottom margin is specified as the number of lines from the bottom of the form's position.

Form Length

Specifies the form length in lines. The maximum form length in lines depends on the current LPI setting; it is equal to the maximum form length in inches multiplied by the current LPI setting. For example, at 6 LPI the maximum form length is 6 LPI x 24 inches = 144 lines.

Only valid form length values will be accepted. If you select a length that is larger than the maximum length for the current LPI, the maximum length will be used. If you need a longer page length, you must first change the LPI.

251

Page 251
Image 251
Printronix P7000 user manual Format, Ansi Emulation Slashed Zero