Printronix P7000 user manual Ink Saver Mode, Test Width, Dram

DIAGNOSTICS

Ink Saver Mode

The overall image density setting will be maintained at a lower level, equivalent to approximately 0.2 PCS below the default setting. The factory default setting is Disable. Select Enable and press the ENTER key to activate the Ink Saver Mode.

DIAGNOSTICS

DIAGNOSTICS

(from page 70)

	Printer
	Tests
Shift Recycle*		Burnin Test
All E’s		Print Error Log 3
E’s + TOF		Print Ribbon Log
All H’s		Clear Error Log 3
All Underlines		Adapter Test1
All Black		Ethernet Test
Shuttle Slow		Acoustic 2
Shuttle Fast		Demo
Shuttle Only		Dice Five
Phase Printer
Paperout Adj.

Test Width

Full Width* 80 col.

Paper Out

Dots

40dots*

(4-76)

* = Factory Default

1If Ethernet adapter is present

2Not available in PCL-II or LG

3Not available in LG

System		Print
Memory		Statistics
32		On: 144.9 Hrs.
Megabytes		Print: 8.3 Hrs
		Print Strokes:
	233441
		Print Lines:
	28250
		11 inch Pages:
	614

DRAM

Avail.

20722480 Bytes

Flash

Avail.

4973757 Bytes

Test Width

Set this parameter to run the self-tests at full width or 80 columns.

289