Chapter 7 Diagnosing Problems
Table 15. LCD Message Troubleshooting Table
Displayed Message | Can User | Explanation | Solution | |
Correct? | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
HMR BANK FAN | Yes | Sensors cannot | Check that fan cable is | |
FLT |
| detect current in | connected. Check for | |
|
| fan circuit. | obstruction of vents and | |
|
|
| fan airway; remove any | |
|
|
| obstructions. Check for | |
|
|
| items beneath the printer | |
|
|
| blocking cabinet vents. | |
|
|
| Power back on the | |
|
|
| printer. If this message | |
|
|
| recurs, contact your | |
|
|
| authorized service | |
|
|
| representative.1 | |
ILL EXT BUS ACC* | No | Fatal firmware | Contact your authorized | |
|
| error on controller | service representative.1 | |
|
| board. |
| |
|
|
|
| |
ILLGL OPR ACCSS* | No | Fatal firmware | Contact your authorized | |
|
| error on controller | service representative.1 | |
|
| board. |
| |
|
|
|
| |
INCOMPAT | Yes | Incompatible | Install a compatible NIC | |
|
| network interface | to the printer then reboot. | |
|
| card (NIC) is | If this message still | |
|
| installed. | appears, contact your | |
|
|
| authorized service | |
|
|
| representative.1 | |
INTAKE FAN FAULT | Yes | Sensors cannot | See description for HMR | |
|
| detect current in | BANK FAN FLT. | |
|
| fan circuit. |
| |
|
|
|
|
332
