ADVANCED USER
File System
•Overwrite Files. Allows you to prevent files from being overwritten by disabling the overwrite function.
•View File List. Displays the list of files in the file system. Pressing the DOWN key displays the file size.
•Delete Files. Displays the list of files in the file system. Pressing the ENTER key deletes the file displayed on the front panel.
Flash Avail. The amount of flash available for the user to save or download files into flash.
•Optimize&Reboot. Reclaims flash space from deleted flash files. After pressing ENTER, wait for the printer to reboot.
NOTE: When the Optimize&Reboot option is executed, the message, “Optimizing Flash Files” does not display before printer rebooting takes place.
•Print File List. Prints a summary of the files stored in flash memory and several statistics on File System usage.
IMPORTANT Do not turn the printer off until it has completely rebooted and is either back online or offline.
Set Sharing
This option allows character sets to be shared between the active LP+ protocol and the active IGP emulation. If CT is installed and active, choosing a character set in the CT activates that character set in the active IGP and LP+ protocols. (These changes will not be visible on the front panel.) If Set Sharing is not selected, only the LP+ will share the CT's character set.
Switching host interfaces from CT to Centronics when the Set Sharing is enabled will cause the LP+ character set to be activated to the same character set of the active IGP, if possible.
285
