Printronix P7000 B49 Error, Sdram # Logical, B50 Error, Sdram Logic, Comb Banks, B50 Status XX%

			Fault Messages
Table 15. LCD Message Troubleshooting Table
Displayed Message	Can User	Explanation	Solution
	Correct?
B49 ERROR:	No	SDRAM DIMM is	Cycle power to see if the
SDRAM # LOGICAL		not compatible with	message clears, if not,
BANKS*		the computer.	contact your authorized
		SDRAM DIMM	service representative.1
		may not be
		properly installed.
B50 ERROR:	No	SDRAM DIMM is	Cycle power to see if the
SDRAM LOGIC		not compatible with	message clears, if not,
COMB BANKS*		the computer.	contact your authorized
		SDRAM DIMM	service representative.1
		may not be
		properly installed.
B50 STATUS: XX%	No	Emulation software	No action is required.
CLEAR FLASH		sucessfully loaded
		in RAM. Old
		program being
		deleted from flash
		memory.
B51: ERROR SDA	No	Problem with I2C	Contact your authorized
LINE STUCK LOW		bus. Either	service representative.1
		SDRAM or PCI
		card shorting out
		the bus.
B51 STATUS: XX%	No	Status message	No action is required.
PROGRAMMING...		file sucessfully
		loaded and is
		being saved in
		flash memory.
B55 STATUS: SEND	No	EC program	No action is required.
PROGRAM TO EC		downloaded and
		being programed
		in EC.

323