Epson FX Emulation
Character Set
This parameter selects a character set for the Epson emulation, as shown in the “Epson FX Character Set Menu” on page 244. Note that when
To use one of these sets, choose the desired group heading (such as European Sets) and press ENTER. Then choose the desired set within that group (such as Roman 8) and press ENTER. Both the group and the desired set will be starred to indicate your selection. Character sets are shown in detail in the Character Sets Reference Manual.
20 CPI Condensed
Compressed print characters are narrower than the normal character set. This is helpful for applications where you need to print the maximum amount of information on a page.
•Enable (default). Prints about 60 percent of the width of normal characters when compressed print is chosen by the host computer. For example, a 12 CPI Draft font will compress to 20 CPI.
•Disable. Does not compress print widths, even if condensed print is chosen by the host.
Alt. Set 80-9F
•Control Code (default). Interprets data in the range of hex 80 through hex 9F as a control code.
•Printable. Prints data in the range of hex 80 through hex 9F.
243
