Reload Paper

1.Raise the printer cover. Raise the platen lever as far as it will go. (See Figure 4 on page 26 for the location of the lever.)

2.Press ON LINE/CLEAR to turn off the alarm. Do not open the tractor doors or remove the existing paper.

3.For cabinet models, open the front door. Align the paper supply with the label on the floor. Ensure the paper pulls freely from the box.

4.Feed the paper up through the paper slot (see Figure 6). It may be easier to feed one corner of the new paper up through the slot first. When this corner can be grasped from the top, rotate the paper back to the normal position.

NOTE: If you are using thick, multi-part forms and are unable to load the new paper over the existing paper, go to step 16.

5.Hold the paper to prevent it from slipping down and through the paper slot.

35

Page 35
Image 35
Printronix P7000 user manual Reload Paper