Serial Matrix Emulation
233
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•CR = CR (default). Does not insert an extra line feed after each
carriage return.
•CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
Auto LF
The Auto LF option defines the printer action when print data is
received past the forms width setting.
•Enable (default). Performs an automatic carriage return and
line feed when data is received past the forms width.
•Disable. Discards any data past the forms width.
Overstrike
This option enables you to print bold characters.
•Enable (default). Turns on bold print. When enabled, overstrike
printing slows down the printer.
•Disable. Turns off bold print.
Define LF Code
•LF = LF (default). Does not perform an automatic carriage
return when a line feed command is received. The next print
position will be the current print position of the next line.
•LF = CR + LF. Forces an automatic carriage return with each
line feed command received. The next print position is print
position 1 of the next line.