Printronix P7000 Error Handling, Error Msgs, Error Markers, Offpage Errors, Barcode Errors

IGP/VGL Submenu

Error Handling

Following are several options which define how errors are reported.

Error Msgs

•Enable (default). Command syntax is checked and error messages printed when command parameters are incorrect.

•Disable. Error checking and error messages are suppressed.

Error Markers

•Enable (default). Prints the following error markers for those elements that print beyond the page boundaries:

>> for elements that begin off the right side of the page;

<<for elements that begin at the indicated position but end off the page; ♦ for elements where the starting position of the

command contains an error other than an off-page error.

Offpage Errors

•Disable (default). Does not report errors for elements that start or end beyond the right edge of the page.

•Enable. Reports errors for elements that start or end beyond the right edge of the page.

Barcode Errors

•Enable (default). An error message will print when invalid barcode data is encountered.

•Disable. VGL will not print an error for illegal barcode data; the barcode will be skipped.

NOTE: When the Barcode Errors option is disabled, the VGL emulation will try to make the best use of invalid data by either truncating extra digits or adding zeros to the end of barcode data to meet minimum data length requirements for some barcodes. Not all errors will be corrected.

161