Agilent Technologies E2050-90003 manual Configuration Methods, Chapter

Configuration

Configuration Methods

When you are connected to the Gateway, you will see general information about the Telnet utility commands, as well as a listing of the current configuration settings for this Gateway.

For example, if you have not changed any of the configuration settings previously, you will see the default configuration settings for the Gateway as shown. In this display, the hardware-addr:value is an example. Your hardware-addr:value will be correct for your Gateway.

Welcome to the E2050 LAN/GPIB Gateway configuration utility.

Commands

?Show additional commands

exit, quit	Exit WITHOUT saving configuration changes
reboot	Save configuration changes and restart
status	Show the LAN/GPIB Gateway connection status
Configuration Parameters
hostname:	E2050	# Internet domain name
hardware-addr:	0800091A0E02	# Ethernet station address
ip:	0.0.0.0	# Internet Protocol address
default-gw:	0.0.0.0	# Default subnet gateway IP address
subnet-mask:	0.0.0.0	# Network subnet mask
syslog-svr:	0.0.0.0	# Syslog server IP address
bootp:	ON	# Obtain config via BOOTP/TFTP
lan-timeout:	0	# LAN connect timeout in seconds
io-timeout:	120	# Server I/O timeout in seconds
allow:	*	# IP allow list
hpib-address:	21	# GPIB Address
hpib-name:	hpib	# GPIB interface symbolic name
hpib-unit:	7	# GPIB logical unit number

7Now you must turn on Local Echo in the Terminal Preferences dialog box so the Telnet utility will display your typed input. From the menu at the top of the Telnet window, select Terminal Preferences. The Terminal Preferences dialog box is displayed.

8Click the checkbox next to Local Echo to turn it on. A checkmark is displayed in the checkbox. Local Echo is now set on.

9Click OK to close the Terminal Preferences dialog box.

46 Chapter 3