Introduction
E2050 Hardware Description
E2050 Hardware Description
In addition to this guide, the E2050 product package consists of:
nE2050 LAN/GPIB Gateway Front Panel
nE2050 LAN/GPIB Gateway Rear Panel
nAC/DC Adapter and Standard AC Power Cord
nRack Mount Kit (Optional)
E2050 LAN/GPIB Gateway Front Panel
As shown in the following figure, the front panel of the Gateway contains 8
E2050 | LAN | GPIB |
LAN/GPIB Gateway |
|
|
Power Fail | Conn Tx Rx | Talk Listen SRQ |
|
| E2050 LAN/GPIB Gateway Front Panel |
|
|
|
LED | Color | Meaning When Illuminated |
|
|
|
Power | Green | Power is applied to the Gateway. |
|
|
|
Fault | Red | Diagnostic failure of the hardware. This LED will normally be off. |
|
|
|
LAN Conn | Yellow | A TCP/IP port is open (Telnet or a LAN connection). Flashes at a |
|
| fast rate for BOOTP or a BOOTP with TFTP configuration. Flashes |
|
| at a slow rate when the default IP address (192.0.0.192) is used |
|
| (after the Config Preset button is pressed). |
|
|
|
LAN Tx | Yellow | Flashes at 10 Hz rate when transmitting packets on the LAN. |
|
|
|
LAN Rx | Yellow | Flashes at 10 Hz rate when receiving packets from the LAN. |
|
|
|
GPIB Talk | Yellow | The Gateway is configured to TALK on the GPIB bus. |
|
|
|
GPIB Listen | Yellow | The Gateway is configured to LISTEN on the GPIB bus. |
|
|
|
GPIB SRQ | Yellow | The GPIB SRQ line is asserted. |
|
|
|
Chapter 1 | 15 |
