Agilent Technologies E2050-90003 manual Installing the Hardware

Installation

Installing the Hardware

nThinLAN Connections. For ThinLAN, connect the LAN cable to the BNC connector on the back panel of the Gateway using a BNC “T” connector. Make sure the ThinLAN segment is properly terminated. If the Gateway is the end node on the LAN, a 50-ohm BNC terminator must be attached to the “T” connector.

Connecting to a ThinLAN Using a BNC “T” Connector

Connecting to a ThinLAN Using a BNC “T” Connector and 50-Ohm Terminator

Chapter 2 29