Agilent Technologies E2050-90003 manual Using the Telnet Utility, Chapter, allow IPaddresses

Administration

Using the Telnet Utility

Command	Description
allow: IP_address(es)	Set the IP allow list configuration value for the Gateway.
bootp: ON/OFF	Turn ON or OFF the use of BOOTP or BOOTP with TFTP
	configuration of the Gateway.
bye	Quit the Telnet utility without saving configuration changes.
config	Display the current configuration settings for the Gateway.
default-gw: IP_address	Set the default subnet gateway address configuration value for
	the Gateway.
exit	Exit the Telnet utility without saving configuration changes.
factory-reset	Reset the Gateway to its default configuration values and reboot
	the Gateway.
hardware-addr	Display the Gateway’s LAN hardware address.
help	Print help information on the main Telnet commands.
hostname: string	Set the Internet domain name configuration value for the Gateway.
hpib-address: 0-30	Set the GPIB address configuration value for the Gateway.
hpib-name: string	Set the GPIB interface symbolic name configuration value for the
	Gateway.
hpib-unit: 1-255	Set GPIB logical unit number configuration value for the Gateway.
io-timeout: seconds	Set the server I/O timeout configuration value for the Gateway.
ip: IP_address	Set the IP address configuration value for the Gateway.
lan-timeout: seconds	Set the LAN connect timeout configuration value for the Gateway.
quit	Quit the Telnet utility without saving configuration changes.
reboot	Save configuration changes and restart the Gateway.
status	Display the status of the Gateway and client connections.
subnet-mask: mask	Set the network subnet mask configuration value for the Gateway.
syslog-clear	Clear the syslog file.
syslog-display	Display the syslog file’s contents.
syslog-svr: IP_address	Set the syslog server address configuration value for the Gateway.
version	Display the version of the Gateway’s firmware.

Chapter 4 69