Introduction

E2050 Hardware Description

E2050 LAN/GPIB Gateway Rear Panel

This figure shows the back panel features of the Gateway. Note that the RS-232 interface is NOT supported for I/O application use..

RJ-45 connector for 10 Base-T,

BNC connector for

unshielded twisted-pair cable

10 Base2, thin coaxial

(Ethertwist LAN)

cable (ThinLAN)

RS-232 connector (the RS-232 interface is not supported for I/O application use)

GPIB Connector

Config Preset button for resetting

 

the Gateway to its factory-set

 

default configuration values

Power input for the DC cable from the AC/DC Adapter (power module)

E2050 LAN/GPIB Gateway Rear Panel

NOTE

Converters are available that provide an Attachment Unit Interface (AUI) connection (10 Base-T to DB15 AUI port) for ThickLAN or fiber optic networks (for Ethernet/IEEE 802.3 protocol).

You will need to purchase both a converter and a Medium Attachment Unit (MAU) to use the E2050 LAN/GPIB Gateway with ThickLAN or a fiber optic network. Contact Agilent Technologies for information on these and other networking products.

16

Chapter 1

Page 16
Image 16
Agilent Technologies E2050-90003 manual E2050 LAN/GPIB Gateway Rear Panel