Administration
Using the Telnet Utility
Welcome to the E2050 LAN/GPIB Gateway configuration utility. Commands
?
exit, quit reboot status
Configuration Parameters |
| |
hostname: | E2050 | # Internet domain name |
0800091A0E02 | # Ethernet station address | |
ip: | 156.140.4.249 | # Internet Protocol address |
0.0.0.0 | # Default subnet gateway IP address | |
0.0.0.0 | # Network subnet mask | |
156.140.4.244 | # Syslog server IP address | |
bootp: | OFF | # Obtain config via BOOTP/TFTP |
7200 | # LAN connect timeout in seconds | |
120 | # Server I/O timeout in seconds | |
allow: | 156.140.4.* | # IP allow list |
21 | # GPIB Address | |
hpib1 | # GPIB interface symbolic name | |
7 | # GPIB logical unit number | |
5If you are using a Windows 95/98/Me/2000/NT client system, you may also need to turn on Local Echo in the Terminal Preferences dialog box so that the Telnet utility will display your typed input. To do this:
n From the menu at the top of the Telnet window, select
Terminal Preferences. The Terminal Preferences dialog box is displayed.
n Click the checkbox next to Local Echo to turn it on. A checkmark is displayed in the checkbox. Local Echo is now set on.
n Click OK to close the Terminal Preferences dialog box.
Chapter 4 | 67 |
