Printronix P7000 user manual Wlan Leap

WLAN LEAP

Renew Lifetime

Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or Days before warning that a new Kerberos password is needed.

•Seconds. The range is 0-604800, and the default is 0.

•Minutes. The range is 0-10080, and the default is 0.

•Hours. The range is 1-168, and the default is 0.

•Days. The range is 0-7, and the default is 0.

•Renew Lifetime Units. Renew lifetime unit in seconds. The default is 0.

WLAN LEAP

WLAN

LEAP 2

(from page 108)

* = Factory Default

1 = Only if a Symbol radio card is installed. 2 = Only if a Cisco radio card is installed.

Auth Method

Open*

Shared

Kerberos 1

LEAP 2

LEAP	Reset LEAP	LEAP	Reset LEAP
Username	User	Password	Password
LEAP Username (01-15)		LEAP Password (01-15)
LEAP Username (16-30)		LEAP Password (16-30)
LEAP Username (31-32)		LEAP Password (31-32)

Auth Method

This feature allows the user to select the authentication method used for the wireless network interface.

•Open (the default). Selects open authentication.

•Shared. Selects shared key authentication.

•Kerberos. Selects Kerberos authentication (for use when a Symbol RF card is installed).

•LEAP. Selects LEAP authentication (for use with a Cisco RF card installed).

123