Chapter 4 IGP/PGL Emulation

Error Report

Sets the error reporting capability for IGP/PGL forms.

On (default). Form boundary error checking reported. Any element which falls off the current page is reported as an error.

Debug Mode. The printer is put in debug mode whenever a form is defined in Create Form mode. Each line of the Create Form is printed along with an error if one occurred. This is the same functionality as if there were a slash (/) entered before the Create Form Name.

Fault. When an error occurs, the error is printed and the message “IGP/PGL ERROR” appears on the printer front panel. The printer then stops printing and goes offline. The error must be cleared before the printer can resume normal operation.

Off. No form boundary checking. Graphic elements appear clipped if they are beyond the page boundaries.

144

Page 144
Image 144
Printronix P7000 user manual Error Report