P-Series XQ Emulation

Define CR Code

This option controls the action of the printer when it receives a Carriage Return code (hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host computer sends line feeds to the printer.

CR = CR (default). Does not insert an extra line feed after each carriage return.

CR = CR + LF. Inserts an extra line feed after each carriage return. The next print position will be print position 1 of the next line.

Auto LF

This option defines the printer action when print data is received past the forms width setting.

Disable (default). Discards any data past the forms width.

Enable. Performs an automatic carriage return and line feed when data is received past the forms width.

Define LF Code

LF = CR + LF (default). Forces an automatic carriage return with each line feed command received. The next print position is print position 1 of the next line.

LF = LF. Does not perform an automatic carriage return when a line feed command is received. The next print position will be the current print position of the next line.

229

Page 229
Image 229
Printronix P7000 user manual Define CR Code, Series XQ Emulation