PCL-II Emulation
PTX Linefeed
•Disable (disable). The default. Linefeed is to be performed as calculated from the bottom of the graphics or barcode, thereby disrupting the vertical text alignment.
•Enable. The Linefeed moves to the next line as calculated from the Top of Form position, thereby retaining vertical text alignment. When printing graphics or bar codes, you may want to set the PTX Linefeed parameter to Enable to maintain text alignment.
PTX Linefeed Enabled
LINE 1 |
|
LINE 2 | Linefeed |
LINE 3 |
|
PTX Linefeed Disabled
LINE 1 |
LINE 2 |
Linefeed |
LINE 3 |
LPI Adjust
This parameter lets you specify the lines per inch (lpi) values: 6 LPI (the default) or 8 LPI.
Page L./Lines
This parameter lets you set physical page length in lines from 12 to 96 at 6 lpi, or 16 to 128 at 8 cpi. The default is 66 lines at 6 lpi.
NOTE: If 6 lpi is selected, you will be able to scroll the menu to 128 (an invalid length). However, when you press ENTER to select this value, the menu will return with the maximum lines for 6 lpi (i.e., 96 lines). Similarly, selecting too few lines for 8 lpi will cause the menu to return with 16 lines.
267
