3270 Params

Change Case

Specifies the font as Mono or Dual case. This option is available only in non-SCS mode. The host will be notified of the change when the printer is placed online. Mono Case prints the same as Dual Case if the character set is one of the following “right to left” sets: Katak., Hebrew, Old Hebrew, and Farsi.

SCS (System Network Architecture Character String) mode is controlled by the host computer.

Dual Case (default)

Mono Case

Set Text Orientn

Specifies the direction in which characters are printed on the page. This allows the printer to print languages which are printed right to left instead of left to right.

Left to Right (default).

Right to Left. When a right to left language is selected, the host will be notified of print direction changes when the printer is put online.

Intervention Req

Select from the following:

Not Send To Host

Send To Host (default). The printer sends a signal to the host computer when any of the following occur:

Printer faults occur.

Hold mode time–out occurs.

If not selected, the printer will only send the signal on printer faults that cause data loss (paper jam, ribbon stall, online platen open, etc.).

191

Page 191
Image 191
Printronix P7000 user manual Dual Case default Mono Case, Left to Right default, Not Send To Host