LinePrinter Plus Emulation

Page Format

Form Length

Forms length is the number of lines that can be printed on a page. You can set the form length in inches, millimeters (mm), or as a function of the current lpi (lines per inch).

Form Width

The form width can be specified in inches, millimeters, or as a function of the current cpi (characters per inch). The forms width set should not exceed the actual paper width.

Margins

Left Margin. Set in columns. Column zero is defined as the far left edge of the page, and column numbering increments from left to right.

Right Margin. Set in columns. Column zero is defined as the far right edge of the page, and column numbering increments from right to left.

Bottom Margin. Defined in lines, starting from line zero at the bottom of the page and incrementing from the bottom up.

Perforation Skip

Disable. Allows printing on page perforation.

You may set up a skip-over margin of 1/2 inch, 2/3 inch,

5/6 inch, or 1 inch. For example, a skip-over margin of 1 inch allows a 1 inch margin at the bottom of the page.

Print Char. Set

When this selection is displayed and the ENTER key is pressed, the current character set is printed.

217

Page 217
Image 217
Printronix P7000 user manual Format, Print Char. Set