
Chapter 4 Coax/Twinax (CTHI) Emulation
Auto Skip At End
Specifies whether or not to perform an automatic form feed at the end of a print buffer. If form feed is the last character in the print order, the form feed function is supplied by the Auto Skip At End option.
•Off (default). Sets the printer to print at print position 1 of the next line.
•On. Sets the printer to print at print position 1 of the first line of the next form.
FF After Job
Determines the print position after an
•Off (default). Performs an automatic new line command after completing a print buffer (unless a new line, form feed, or carriage return command was the last one executed). The printer is set to print at print position 1 of the next line.
•On. Performs an automatic form feed command unless a form feed was the last one executed. The printer is set to print at print position 1 of the first line on the next form.
CR, EM, and NL (3287 only)
CR (Carriage Return), EM (Error Message), and NL (New Line) specify that the printer treat the CR, EM, and NL control codes either as spaces or as control codes.
•On (default). Treats the CR, EM, and NL commands as control codes.
•Off. Treats the CR, EM, and NL commands as spaces.
194