Chapter 4 LinePrinter Plus Emulation (with PCL-II)
•Ignore LPI. All LPI commands sent by the host are ignored by the printer.
•Ignore Unidir. All Unidirectional commands sent by the host are ignored by the printer.
Font Attributes
Typeface
•Data Processing. A general purpose font printing out at
120 dpi horizontally and 72 dpi vertically. The width of the font will vary with each cpi.
•NLQ. A high quality font printing at 180 dpi horizontally and
96 dpi vertically. This font has serifs and the width of the font varies with the cpi.
•
•High Speed. A draft quality font printing at 120 dpi horizontally and 48 dpi vertically. The width of the font varies with the cpi.
•NLQ Sans Serif. A high quality font printing at 180 dpi horizontally and 96 dpi vertically. This font prints without serifs. The width of the font varies with the cpi.
•High Speed 100. A draft quality font printing at 100 dpi horizontally and 48 dpi vertically. When chosen from the front panel, it defaults to 10 cpi. The cpi can then be varied, but the width will not change.
•NLQ 200. This NLQ font prints at 200 dpi horizontally and 96 vertically. When chosen from the front panel, it defaults to 12 cpi. The cpi can then be varied, but the width will not change.
•DP 200. This Data Processing font prints at 200 dpi horizontally and 72 vertically. When chosen from the front panel, it defaults to 12 cpi. The cpi can then be varied, but the width will not change.
214
