Chapter 4 Coax/Twinax (CTHI) Emulation
Compatibility Op
The Compatibility Options allow you to select special printer functions in the
CR At MPP+1
MPP is Maximum Print Position, which is also known as line length. This option controls a carriage return at the end of a print line and at MPP+1.
•On (default). Produces a carriage return to the first print position of the next line.
•Off. Produces a carriage return to the first print position of the current line.
NL At MPP+1
Controls how many lines are skipped when the carriage returns to a new line.
•On (default). Moves to the first print position two lines down from the current position.
•Off. Moves to the first print position of the next print line.
Position Aft FF (4234 only)
Allows you to select the location of the print position after a form feed command is sent.
•On (default). Sets the printer to print at print position 1 of the first print line on the next form.
•Off. Sets the printer to print at print position 2 of the first print line on the next form.
