IGP/PGL Submenu
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is 1/6 inch from the top of one print line to the top of the next print line. The options are:
•6.0 (default)
•8.0
•9.0
•10.0
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using the ALPHA command.
•Disable (default). The printer will print text in upper and lowercase.
•Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a PGL command is received.
•Enable (default). The printer ignores all data on the current line before an IGP command.
•Disable. The printer will print all data on the current line before an IGP command.
Forms Handling
This submenu allows the user to handle the form in the following ways:
•Disable (the default). No effect.
•Auto Eject. Automatically ejects a page at the end of the job to spill out the last page.
•Auto TOF. Automatically does a form feed (FF) at the end of each form to the next top of form.
135
