Printronix P7000 user manual IGP/VGL Emulation True Vert 1/10, Absorb After PY, Rot. Char Size

Chapter 4 IGP/VGL Emulation

True Vert 1/10

•Enable (default). A vertical 1/10 inch parameter is used as 1/10

inch. Rounding occurs to the nearest 1/72 inch. This can cause vertical moves that have the same value to differ by ± 1/72

inch.

•Disable. A vertical 1/10 of an inch parameter is used as 7/72 of an inch. The absolute move is slightly smaller than expected. For example, a one-inch move would be 70/72 of an inch. Vertical moves that have the same value are identical in length.

Absorb After ^PY

•Absorb Motion (default). The first paper motion following a ^PY command is ignored.

•Absorb All. The system ignores all the data and terminator until a host generated motion terminator is detected.

•Disable. System terminators following a graphics command are sent to the printer and result in paper motion.

UPC Descenders

•Enable (default). UPC/EAN barcodes are printed with descenders, even if there is no human readable data.

•Disable. UPC/EAN barcodes are printed without descenders if there is no human readable data.

Rot. Char Size

•Adjusted (default). Rotated (clockwise/counterclockwise), expanded characters have a different size than an unrotated character with the same size parameters.

•Not Adjusted. Rotated, expanded characters are the same size as unrotated characters with the same size parameters.

156