Printronix P7000 user manual IGP/PGL Emulation 5 Selection, AI 00 Spaces, Select SO Char

Chapter 4 IGP/PGL Emulation

I-2/5 Selection

This option is added to be compatible with a special IGP-X00 customization. Usually, if I-2/5 barcodes have an odd number of digits, a leading zero is inserted in front of the data. However, this special IGP-X00 customization gives you the option of adding a space character at the end of the barcode instead.

•Leading Zero (default). A leading zero is inserted in front of the data.

•Trailing Space. A space is inserted at the end of the data.

•X2 DPD. When selected, an I-2/5 barcode with an X2 magnification will use the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for compatibility issues.

•Modulo 7 CD. The I-2/5 barcode uses a modulo 7 check digit instead of the default modulo 10 check digit.

AI 00 Spaces

This option is designated for EAN/UCC-128 barcodes whose application identifier (AI) is 00.

•Disable (default). The printable data field is printed with the AI enclosed in parentheses. This is the standard EAN/UCC-128 format.

•Enable. The printable data field is printed with the UCC fields separated by spaces. This option is IGP-X00 compatible.

Select SO Char

Allows you to specify a decimal code from 0 through 255 to be used in place of SO (Shift Out) as the control code. This allows access for the alternate set of control function characters. See the description of the Code 128 barcodes in the IGP/PGL Programmer's Reference Manual for details.

138