Chapter 4 PCL - II Emulation
266

Face CPI Delay

Allows the combination of different font densities on the same line.
•Enable (default). Different font densities can be used on the
same line.
•Disable. Only the same font densities are allowed on the same
line.

Graphics Density

Graphics can be printed in 60 DPI (the default) or 70 DPI.

Perforation Skip

•Disable (default). Allows printing on page perforation.
•Enable. You may set up a skip-over margin. For example, a
skip-over margin of one inch creates a one inch margin at the
bottom of the page.

Display Functions

•Disable (default). The default. Control characters are not
printed.
•Enable. Control characters are printed before they get
executed. This is a useful debugging tool.

Line Terminator

You can define the action of the line. Four options are available: LF
after CR, CR after LF, CR after FF, and CR after VT. Each of these
options may be enabled or disabled independent of one another.