Printronix P7000 B23 Error, Cksum, B30-STATUS, Initializing, B35-STATUS, Waiting for EC, Status

			Fault Messages
Table 15. LCD Message Troubleshooting Table
Displayed Message	Can User	Explanation	Solution
	Correct?
B23 ERROR:	No	FLASH SIMM may	Cycle power to see if the
DECOMPRESS		not be properly	message clears, if not,
CKSUM*		installed.	contact your authorized
			service representative.1
B30-STATUS:	N/A	Status message	No action is required.
INITIALIZING		informing the
		operator that
		software is being
		downloaded
		through one of the
		printer’s I/O ports
		using the two-key
		download
		activation.
B35-STATUS:	N/A	Waiting for EC/DC	No action is required.
WAITING FOR EC		Powerup
STATUS		handshake.
B40 ERROR:	No	SDRAM DIMM	Cycle power to see if the
SDRAM EEPROM		may not be	message clears, if not,
CKSUM BAD*		properly installed.	contact your authorized
			service representative.1
B41 ERROR: DIM	No	SDRAM DIMM is	Cycle power to see if the
MEMORY NOT		not compatible with	message clears, if not,
SDRAM*		the computer.	contact your authorized
		SDRAM DIMM	service representative.1
		may not be
		properly installed.
B42 ERROR:	No	SDRAM DIMM is	Cycle power to see if the
SDRAM ROWS NOT		not compatible with	message clears, if not,
ALLOWED*		the computer.	contact your authorized
		SDRAM DIMM	service representative.1
		may not be
		properly installed.

321