Frequently asked questions
Repairs to electrical appliances must only be carried out by a qualified and trained technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work.
Check and fault messages in the display
What if ... | Possible cause | Solution | |
This is not a fault. | Single items should be | ||
Adjust the load | The electronic reads that no | dried with a "Timed | |
| laundry is in the drum and | drying" program. | |
| cancels the program. | To delete the message: | |
| Single items or already dried | – | Open the door. |
| laundry can also cause a |
|
|
| program stop. |
|
|
The fault cannot be detected | – | See "Settings - | |
Technical fault | immediately. |
| Supervisor level - |
A numerical fault | In some cases "Clean out |
| Cleaning the airways". |
message shows, | airways" is displayed. | To delete the message: | |
e.g. "F47". |
| – | Confirm with "OK". |
|
| If the problem persists | |
|
| contact Miele. | |
26
