Frequently asked questions
Other faults
What if ... | Possible fault | Solution |
The program | In some cases "Clean out airways" is displayed. See | |
runs too long or | "Settings - Supervisor level - Clean the airways". Open and | |
stops. | close the dryer door. |
|
| The air supply is | Open a window or door to |
| insufficient. | increase the air flow. |
| The lint filter is clogged | Remove the lint. |
| with lint. |
|
| The exhaust hose or the | – Check the exhaust parts |
| connection is clogged with | regularly (e.g. wall vent duct, |
| lint. | louvered wall vent, bends, |
|
| etc.) for air permeability. |
|
| – Remove the lint. |
| The laundry was not spun | Spin laundry thoroughly before |
| sufficiently in the washer. | drying. |
| The dryer has | Regard the maximum load size |
|
| per program. |
| Metallic zippers prevent a | – Open the zippers of the |
| correct measurement of | laundry before drying. |
| the laundry’s residual | If the problem persists, dry |
| moisture. | items with long zippers using |
|
| the "Warm air" program. |
The laundry is | The load contained too | – Continue drying using the |
not dry enough. | many dissimilar items (size | "Warm air" program. |
| and fabrics.) | – See the "Program Guide" for |
|
| suitable programs. |
28
