Frequently asked questions
What if ... | Possible cause | Solution | |
At the end of a | The dryer reminds you to | – Remove and clean the lint filter. | |
program | clean the lint filter. | To delete this message: | |
Clean filter or |
| – | Confirm with "OK". |
Clean the lint filter |
| ||
The cycle of the "Clean | – | See "Settings - Supervisor level | |
appears | filter" message can be |
| - Cleaning the lint filters". |
|
| ||
| adjusted. |
|
|
Clean out airways | The dryer does not work | – Check all possibilities as | |
| at its optimum or not |
| described under "Other faults - |
| efficiently. |
| The program runs too long or |
| Possible cause: |
| stops". |
| clogging by lint or | To delete this message: | |
| detergent residues. | – | Confirm with "OK". |
| The exhaust duct may | With a long exhaust duct, program | |
| be very long. This is not | times and energy consumption | |
| a fault. | increase. | |
|
| The "Clean out airways" message | |
|
| cycle can be adjusted. | |
|
| – | See "Settings - Supervisor level |
|
|
| - Cleaning the airways". |
Program finish | This is not a fault. | While the timer was counting | |
time changed |
| down, the settings were changed | |
|
| ||
|
| or there was a power failure. | |
27
