IMPORTANT SAFETY INSTRUCTIONS

￿When installing multiple dryers to one collective exhaust duct, a non-return flap per dryer must be installed directly to the collective duct. Otherwise the dryers could be damaged and the electrical safety affected.

￿The installation of this unit in non stationary locations (e.g. ships) must be performed by a qualified installer or service agency, in strict accordance with national and local safety regulations and standards.

￿Do not install the machine in rooms where temperatures below freezing may occur.

￿If there is any doubt concerning installation, contact Miele’s Technical Service Department.

SAVE THESE

INSTRUCTIONS

35

Page 35
Image 35
Miele PT 7136 PLUS installation manual Save These Instructions