HP UX 11i v1 I/O Cards manual Data.setctl.cfgclass, Data.setctl.cfginfo1, Zcom subsystem

ZCOM C I/F Library Routines

ZCONFIG (3X)

data.setctl.cfg_class

Caller supplied type of reconfiguration. There is one predefined configuration class, ZcCLASS_X25. This event should be generated whenever an X.25 link is dynamically configured. This includes modifying the number and/or type of Virtual Circuits and creating or deleting an X.25 level 2 (LAPB) ZLU.

If the ZCOM Subsystem is used with X25/9000 and x25init is executed, this event will be generated if the configuration for an X.25 link is modified. This field is used for action 3 only.

	data.setctl.cfg_info1
	Caller supplied information that should be specific to the type of
	reconfiguration which took place. In the case of ZcCLASS_X25, this field
	must contain the X.25 Level 2 ZLU of the link’s configuration that was
	modified. Note that even if the ZLUs for a link were deleted from the
	configuration, the old Level 2 ZLU must still be supplied. A positive ZLU
	number indicates the link has been added, while a negative ZLU value
	indicates the link was deleted. This field is used for action 3 only.
	Response Data
	No specific response data or error.
System	There are 5 system configuration actions. They are for altering
Configuration	parameters related to the whole ZCOM runtime subsystem. Action 1 is
	for changing the ZCOM runtime system name. The system name is for
	information purposes only. This function does not affect the operation of
	the ZCOM subsystem.
	Action 2-5 modify various default queue limits in the ZCOM subsystem.
	Such default limits only affect newly created queues. To modify limits on
	existing queues, use the zsetql(3X) routine instead.

Chapter 4 185